Solcan 2101 Portrait 7'X4' Flat-Plate Solar Thermal Collector (Standard)

MADE IN CANADA

Engineered through the decades, the solcan™ 2101 flat-plate solar thermal collector is the evolutionary successor to our earlier models which utilize copper fins with integral copper tubes that run between copper manifolds or headers. The copper fins have a black selective coating with an absorptivity for solar radiation of 0.95, and an emissivity for infrared radiation of 0.05.

Our black selective surface is more reliable and withstands higher temperatures and humidity than other designs. The collector container is brake-formed aluminum sheet insulated with isocyanurate foam board, and the glazing is 3mm low-iron tempered glass (4mm is available) and adheres to the collector box with black silicone sealant.

The isocyanurate foam has a conductivity of 0.0181 W/m.k, and has a thickness of 25mm on the back and 16mm on the sides.

Our solcan™ flat-plate solar thermal collectors offer a quality renewable alternative for residential, commercial, and/or industrial hot water applications.

Thermal Performance: The collector was tested as part of an SRCC test at the National Solar Test Facility in Mississauga, Ontario. The first order equation for efficiency is:

0.767—3.33(TI-Ta)/I for 0.046 kg/s

The stagnation temperature is 191°C. We recommend a flow of 1.5L/min for the standard collector (nominal 4ft x 8ft).

Weight is 50kg + 2.27kg for shipping. Supply and return through header.